The mission of mechanical bending machine in industrial production is self-evident, so what should be paid attention to in its operation?
1. Only after the workpiece is placed stably and aligned can it be started for operation, and the signal shall be clear and one person shall be designated for command.
2. Hands shall not be placed on the rolled steel plate, and the sample plate shall not be used for inspection. The sample plate can be used to check the roundness after shutdown.
3. When rolling the workpiece that is not round enough, when rolling to the end of the steel plate, a certain margin shall be reserved to prevent the workpiece from falling and hurting people.
4. During operation, no one is allowed to stand on the workpiece, and it is not allowed to find the roundness on the rolled cylinder.
5. When rolling thick cylinder with large diameter or workpiece with high material strength, a small amount of moving roll shall be lowered and rolled for many times.
6. When rolling a narrow cylinder, it shall be placed in the middle of the roll.
7. After the workpiece enters the roll, prevent hands and clothes from being drawn into the roll.
LINK:CT8 PRESS BRAKE / E21 PRESS BRAKE / HYDRAULIC SHEARING MACHINE / ELECTRIC SHEARING MACHINE
Site map technical support:whtime.net