The synchronous layout of the slider of the bending machine is the same as that of the torque axis

Release time：2021-10-12　　　　 Browse times

1. The synchronous layout of the slider of the bending machine refers to the forced synchronization of the torque axis.

2. Reference constraint block organization, quiet and sure.

3. It refers to all welded steel structure with sufficient strength and stiffness.

4. The hydraulic cylinder is at both ends of the transmission, the saw is placed on the slider, and the slider works in a straight line.

5. Wedge deflection compensation trap, so as to ensure high-precision bending.

6. Slider route, agile adjustment of anxiety, manual fine-tuning, exposure counter.

One month after the reward of the bending machine, check the damaged parts of each oil pipe. If there is no shape, it should be changed. After two months, it should be fastened in the connection of all parts. The progress and service should be closed and the system has no pressure.

The hydraulic bending machine comprises a support, a worktable and a clamping plate. The worktable is installed on the support. The worktable is continuously supported by the base and the clamping plate. During the setting process, the hinge clamping plate is closed by the shell and a cover plate. In autumn, it falls on a shell coil, and the top is covered with a cover plate.

When the pressing plate is selected by the coil, the explosion of gravity, so as to realize the pressure plate and clamp it on the plate base. The reason is that the electromagnetic force clamp can not only fix multiple parts, but also polish the prosperous side wall of the workpiece.